Everbuild Stixall 290ml Cartridge

Everbuild Stixall 290ml Cartridge

Availability: In stock

DESCRIPTION

Everbuild Stixall is a one part, chemically curing solvent free sealant and adhesive combining the best q...View the full description

Product Code

Description

Stock

Unit Of Sale

Product Variants

109600

Everbuild Stixall 290ml Cartridge Crystal Clear

Everbuild Stixall 290ml Cartridge Crystal Clear

Product Code

109600

Stock

61

Unit of Sale

*contains 1 unit(s)

PRICE Ex VAT

  • Buy 1 for £5.25

109601

Everbuild Stixall 290ml Cartridge White

Everbuild Stixall 290ml Cartridge White

Product Code

109601

Stock

33

Unit of Sale

*contains 1 unit(s)

PRICE Ex VAT

  • Buy 1 for £5.15
Product Description

DESCRIPTION

Everbuild Stixall is a one part, chemically curing solvent free sealant and adhesive combining the best qualities of silicone and polyurethane technologies. It is specifically designed for adhering most common building surfaces to each other and themselves.

FEATURES AND BENEFITS

  • Incredible initial grab, no slip & gap filling properties. 
  • High bonding strength. 
  • Interior and exterior use. 
  • Can be applied to wet surfaces. 
  • Totally waterproof & weatherproof.
  • Quick curing.
  • Overpaintable if required (with water based paints - test an inconspicuous area before use).
  • Solvent free. 
  • Resistant to temperature extremes -40°C to +100°C.
  • Resistant to chemicals & petrol (10% dilute acids/alkalis, most solvents).
  • Excellent resistance to UV radiation. 
  • Shrinkage < 2%
  • Excellent primerless adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, perspex, glass, wood, enamel, painted surfaces etc.

USES

  • As a high quality nail replacement adhesive, even to damp surfaces. 
  • Perimeter pointing around doors and windows, especially in mobile structures such as caravans and boats.
  • Bonding mirrors to most common substrates. 
  • Automotive gap filling and sealing.
  • Jointing cladding panels.
  • Any application requiring high performance, durable sealing and bonding of joints.
  • Applications where resistance to chemical spillage is required.

APPLICATION INFORMATION

  • Curing Rate - ~1mm / 24hr (at 23°C and 50% RH)
  • Skin Time - 30 ± 10 min (at 23°C and 50% RH)
  • Ambient Air Temperature - 5 to 35°C

SUBSTRATE PREPARATION

All surfaces must be clean and dust free. Surfaces may be damp, but have no standing water. Can be used under water for emergency repair.

LIMITATIONS

  • Use on overhead applications – Always use in conjunction with mechanical fixings. 
  • Use in conjunction with mechanical fixings for glass block fitting or large mirrors (>0.5m2 total area). 
  • For heavy items, provide temporary support until adhesive has dried. 
  • Do not seal mirror edges/plastic sheeting until adhesive has cured. 
  • In areas of high UV; some darkening/discolouration may occur. This does not affect the performance of the sealant. 
  • Overpaintability: check compatibility with specific paint first before over painting large areas.
  • Do not use on surfaces that bleed oils or plasticizers. 
  • Not for use as part of a glazing system.
  • Not for use in aquarium manufacture. Use EVERBUILD AQUA MATE. 
  • Not for use in conjunction with bitumen, or asphalt. Use EVERBUILD WEATHER MATE. 
  • Yellowing can occur in predominantly dark conditions. 
  • Certified as a sealant for internal use only. It is the user’s responsibility to determine suitability for use. If in doubt, please contact Technical Services Department for advice.

Product Videos