Wall Lining System Track 3.0m (20x20x30mm)

Wall Lining System Track 3.0m (20x20x30mm)

Product Code: 108380

Instock: 75 Each

This is our current stock level against this product which is ready to be collected or delivered. Please note this stock level can vary whilst browsing & placing an order online.

Availability: In stock

PRICE

Exc VAT

  • Buy 1 Each for £2.49
Big & Bulky

This item is classified as Big & Bulky which means it can only be delivered within 30 miles of our warehouse in IG11 0AG.

Product Description

DESCRIPTION

Wall Channel System (WCS), which consists of vertical channels fixed back to the structure creating a void which can be used to overcome surface irregularities and/ or to create a service void. The benefits of this system include increased acoustic or thermal performances, as well as the ability to create service voids of any size.

FEATURES AND BENEFITS 

  • Lightweight in comparison to timber
  • Quick & easy to install

MANUFACTURING STANDARDS

Manufactured using roll forming to European Standard EN10346 from Hot-dipped galvanised steel.

It is usual to find that Hot dipped galvanised steel profiles &/or components may have residues of Low oil content, semi-synthetic coolant and/or multi-purpose lubricants.

HANDLING AND STORAGE

The products are secured in bundles using straps or bands, which should not be used to lift the product. As these straps and bands are under tension, they can injure eyes or other parts of their body when the tension is released. The products are transported on pallets or wooden chocks and should be offloaded using a suitable forklift truck. The products should be stored in suitable racks that will ensure stability. The product will have sharp edges therefore appropriate protective items should be worn when handling. Refer to the Manual Handling Operations Regulations 1992 (as amended) for guidance

Respiratory Protection: Under normal conditions of use this is not required. When high levels of dust are generated by mechanical or hand sanding suitable respiratory protective equipment should be worn. AP2 dust mask may be appropriate to EN149, FFP25

Hand Protection: Suitable protective gloves should be worn when cutting both the product and the straps or bands.

Eye Protection: Suitable eye protection should be worn when using power tools or when cutting straps or bands.

Skin Protection: Suitable protective items should be worn to prevent cuts when handling the product or releasing the straps or bands. Refer to Personal Protective Equipment at Work Regulations 1992 (as amended) for guidance.