DESCRIPTION

Sika Dustproofer is a economic, ready to use dustproofer and concrete surface hardener for concrete floors, paths and driveways. Sika Dustproofer forms hard insoluble crystals binding together the particles and sealing the surface to form hard impermeable non-dusting concrete and paving.

FEATURES AND BENEFITS

• Hardens and dustproofs concrete surfaces.
• Improves wear resistance. 
• For garage, industrial and workshop floors.
• Ready to use. 
• Economic. 
• Reduces permeability 
• Dust free finish.

USES

• Dustproofing concrete floors.
• Hardener for concrete drives, paths and floors. 
• Internal/external use. 
• Use on new or old floors with no surface coatings.
• Ideal in garages, factories and industrial units where dusting could be a problem.

SUBSTRATE PREPARATION

Prepare the surfaces to be cleaned by removing any oil, grease and dirt by the use of a wire brush or hard broom. Ensure all loose and friable material is removed. The resulting debris and dust should be vacuumed off. The floor must be dry before applying Sika Dustproofer

LIMITATIONS

• Only of use on cement containing surfaces.
• Always wash down to remove unreacted material after use.
• Will not restore badly disintegrated concrete.
• Always carry out repairs using EPOXY MORTAR prior to use of SikaDustproofer.
• Do not treat concrete within 21 days of laying.
• Do not paint once surface is treated.