DESCRIPTION 

151 Galvanising Spray Paint can be used as an undercoat on clean metal and also protects against corrosion and rust.

DIRECTIONS FOR USE

• Ensure surface is clean and dry, remove all dirt, grease, oil, rust, moisture etc
• For best results, the can should be at room temperature before use.
• Use in warm, dust free and windless conditions and avoid cold, damp conditions. Use only outdoors in a well-ventilated area.
• To ensure colour uniformity, shake can from side to side for approx 1 minute before spraying. During use occasionally shake to ensure colour uniformity and to prevent the nozzle from clogging.
• Test on an inconspicuous area before use.
• When using ensure the can is approx 20 – 30cm away from the surface to be painted and apply in a smooth, sweeping motion.
• Build up the paint in a few thin coats and allow the paint to become touch dry between coats (approx 60 mins)
• After use ensure nozzle remains unblocked by either holding the can upside down and spraying on some cardboard or remove the nozzle and soak in thinners.
• Paint will be completely dry after 24 hours.