DESCRIPTION

A acid based cleaner formulated to remove unsightly stains caused by numerous every day occurrences, as well as builders splatter.

USES

• For removing cement and mortar splashes, light oil stains and grease from brickwork, paving, tiles, earthenware and concrete. Bond It HIGH STRENGTH BRICK ACID should not interfere with the various types of concrete and stone (except limestone and marble) commonly encountered in the general building area. Efflorescence can also be removed by using this product diluted.

APPLICATION INFORMATION

• Gloves, overalls, boots and goggles should be worn at all times during application. Protect metal surfaces and paint-work before application with polythene sheets and tape. Remove excess dirt, mortar, etc. with a stiff yard brush. If cleaning down brickwork saturate area with water to prevent damage to mortar. Before commencing a full clean down, test on an inconspicuous area with Bond It HIGH STRENGTH BRICK ACID diluted 4:1, water to cleaner. For normal use dilute between 2 and 4 parts water to 1 part cleaner. Apply using a brush and allow to stand for 10- 15 minutes ensuring the area does not dry out and is scrubbed occasionally with a stiff yard brush. Rinse thoroughly with large amounts of water, do not add water to neat cleaner, always add the cleaner to the water. If stains persist, repeat the process and/or use the cleaner undiluted taking care to test the neat cleaner first on an inconspicuous area. For removing efflorescence use a 8:1 dilution water to cleaner. Always use a plastic container for diluting this product.

LIMITATIONS

• Do not use Bond It HIGH STRENGTH BRICK ACID on limestone or marble as the chemicals will attack the surface. This product can also have an adverse effect on coloured concrete, test an inconspicuous area before use. HIGH STRENGTH BRICK CLEANER and its fumes will attack limestone, marble stainless steel and aluminium. If used internally extreme care should be used and thorough ventilation provided. Do not allow product to come into contact with metals such as steel, copper, aluminium and titanium.