- Product Description
-
DESCRIPTION
A one part, ready-to-use internal plaster bonding agent with added aggregate to provide a key prior to plastering on smooth surfaces
- Bonding Agent for smooth surfaces
- Contains sand/aggregate to provide plaster key
- Ready to use, one coat application
- Perfect for use on smooth substrates
- Pigmented yellow to identify treated areas
- Phthalate free formulation.
USES
- PLASTERERS PREGRIT should be used as a primer/ bonding aid prior to plastering on surfaces such as concrete, plaster and difficult, low or non-porous substrates. For internal use only, this product is not suitable for external applications..
APPLICATION INFORMATION
- Thoroughly stir before use. Ensure all surfaces are clean, dry and free from any contaminants that may hinder adhesion, including any loose or flaking material. Ensure the background is sound and will support the weight of the plaster. Do not dilute. Simply apply one coat using a brush or roller and leave to dry for a minimum of 24 hours before plastering. Note: cold or humid conditions will increase drying times. Do not use in temperatures below 5ºC
LIMITATIONS
- Do not use in areas where permanent dampness is likely.
- Do not use on new cement when cement has not fully cured.
- Do not use when the temperature is below 5ºC.
- Do not use for external applications.
