DESCRIPTION

A ready-to-use, black water based coating for tarmac drives and pathways

• Restores tarmac colour.
• Helps protect from water damage.
• Ready to use.
• Reduces dirt/grime build up
• Inhibits organic growth.
• Solvent free.

USES

• Designed to restore colour, reduce water penetration, and protect from dirt/grime build-up.

APPLICATION INFORMATION

• DRIVE ALIVE TARMAC RESTORER is ready to use, and does not require diluting. Stir thoroughly before using and ensure the surface is completely dry prior to application. Apply using a brush, roller or squeegee, ensuring that no pooling or ponding occurs. Two coats are recommended, allow a minimum of 4 hours between coats. Cold or humid conditions will slow drying times.

SUBSTRATE PREPARATION

• Ensure the surface to be treated is free from oil, grease, dust and any other loose material that may hinder adhesion. It is recommended that a test be carried out on a small inconspicuous area to ensure the required effect is achieved.

LIMITATIONS

• Do not apply to wet or damp surfaces or in conditions of high humidity. Surfaces should be allowed to dry completely for 48 hours prior to application. Do not use if rain is imminent (protect from rain until dry). Do not apply to non-porous surfaces. Keep children and animals away and do not traffic until fully cured. Do not allow any run off to contaminate drains, waterways or plants. Do not use in temperatures below +5°C and above +30°C. TARMAC RESTORER is not recommended for use on permeable tarmac.