DESCRIPTION

ColorFill has been scientifically formulated and tested to resist moisture, detergent and other household products. It will withstand heat and direct sunlight. ColorFill is 100% Waterproof - no amount of water will break ColorFIll down. This makes Colorfill perfect for laminate worktop joints. With its hydrophobic base polymer structure and lack of additives such as surfactants and coalescing solvents as used with emulsion polymers, is impervious to water.

APPLICATION INFORMATION

• Use 1 tube of ColorFill per joint. Apply a thick bead of ColorFill around the leading edge of the joint to both the bottom and top of the exposed core taking care to ensure adequate sealant around the front and back edges and bolt slots. 
• Quickly close the joint and allow excess sealant to squeeze out of the joint, align the two sides and tighten the bolts fully. Do not overstress joints. It is important that the joint is closed quickly as the sealant will start to set immediately.
• The excess sealant should be removed with a spatula which should be drawn towards the front edge from the back of the worktop applying pressure down and into the joint thus ensuring there are no air holes along the top of the joint.
• Clean off the remaining surplus sealant with a solvent moistened tissue taking care not to dislodge any ColorFill still setting in the joint.  Clean across the joint at 90° to the cut at all times.

TECHNICAL TEST

• Squeeze out a liberal amount of ColorFill onto a laminate off cut
• Wait for it to dry - leave for 24 hours
• Place Colorfill in a glass of water and leave it there for as long as you like, from a day to a year