Everbuild Contract 125 One Hour Caulk White Cartridge

Everbuild Contract 125 One Hour Caulk White Cartridge

Availability: In stock

DESCRIPTION

Everbuild Everflex 125 One Hour Caulk is a fast drying flexible decorators filler and sealant which can be ove...View the full description

Product Code

Description

Stock

Unit Of Sale

Product Variants

106304

Everbuild Contract 125 One Hour Caulk White C3 Cartridge

Everbuild Contract 125 One Hour Caulk White C3 Cartridge

Product Code

106304

Stock

101

Unit of Sale

*contains 1 unit(s)

PRICE Ex VAT

  • Buy 1 for £1.18

106305

Everbuild Contract 125 One Hour Caulk White C4 Cartridge

Everbuild Contract 125 One Hour Caulk White C4 Cartridge

Product Code

106305

Stock

51

Unit of Sale

*contains 1 unit(s)

PRICE Ex VAT

  • Buy 1 for £1.65
Product Description

DESCRIPTION

Everbuild Everflex 125 One Hour Caulk is a fast drying flexible decorators filler and sealant which can be overpainted with all paint types, or covered over with wallpaper. No sanding down is required. Remains permanently flexible.

FEATURES AND BENEFITS

  • Fast drying - can be overpainted in 1 hour. 
  • Permanently flexible.
  • Easy water clean up.
  • Excellent slump resistance

USES

  • For sealing and filling cracks and gaps prior to decorating.
  • For use around skirting boards, ceiling cornices, window and door frames, stair treads and risings and fixtures adjoining walls
  • Can be used to fill damage plaster.

APPLICATION INFORMATION

  • Ambient Air Temperature - +4°C to +40°C
  • Curing Time - 3 to 5 days, dependent on thickness, ambient temperature and humidity

SUBSTRATE PREPARATION

All surfaces must be clean, dry and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Highly porous substrates such as new plaster should first be primed with a dilution of Caulk with water at a ratio of 1:2. Can be applied to slightly damp surfaces

LIMITATIONS

  • Not for use in conjunction with bitumen or asphalt.
  • Do not attempt to abrade when cured.
  • Do not overpaint until a surface skin has formed. Note: this product is  flexible.
  • Certain poor quality paints (especially certain vinyl matts) have very little movement in the dry film.
  • It is possible for the dry paint film to crack if movement is excessive.
  • For internal use only.
  • Should not be used in conditions of continuous immersion, below ground level, in areas of high abrasion (e.g. floor joints).