DESCRIPTION

Everbuild Forever White Grout Reviver is the easy way to revive and restore discoloured and dirty grout to a bright white finish. With Mould Shield® the leading anti-bacterial solution integrated into the manufacturing process, and it is proven to stop mould, mildew and bacterial growth. Mould Shield®, in conjunction with Everbuild deliver high quality antimicrobial products, manufactured in the UK and rigorously tested in accredited microbiological laboratories to show no mould growth after 10 years simulated ageing and actively prevent the growth of bacteria, mildew and black mould that are commonly found in areas of high humidity. Copies of test data are available upon request. Forever White Grout Reviver dries to an extra brilliant white finish.

FEATURES AND BENEFITS

• Excellent water resistance. 
• Dries brilliant white.
• Contains Mould Shield - prevents mould growth. 
• Ready mixed formula - no mixing, no mess.
• Apply straight from the tube with the easy to use applicator

USES

• Kitchen/Bathroom walls.
• Shower areas.
• Wet Rooms.

APPLICATION INFORMATION

Remove cap and squeeze the Grout Reviver tube until product is expelled. Continue squeezing and apply to grout lines in a zig zag motion ensuring even coverage and working well into existing grout. Allow to dry for 3-4 hours then remove any excess product from tiles with a damp cloth or sponge. Any residue still remaining on tiles can easily be removed by moistening; leaving for 15 minutes then removing as above. A second application may be necessary for badly stained areas; after first coat is dry (3-4hours). After removal of residues; polish tiles with a clean dry cloth. Avoid wetting tiles for 24 hours after application (longer in cold poorly ventilated/humid conditions). Rinse applicator sponge in warm water after use and replace cap to enable product to be used again. Wash hands with warm water and soap after use.

SUBSTRATE PREPARATION

Surfaces must be clean, dry and dust free. Remove any old mould with Everbuild 404 Fungicidal Wash prior to application and allow to dry. Replace any damaged, loose or cracked grouting by raking and re-grouting with Everbuild Tile Adhesive; then allowing to dry. Certain tiles (e.g. non glazed; metallic; textured or hand painted) may not be compatible with this product. Always test a small inconspicuous area for compatibility prior to full scale application.

LIMITATIONS

• Allow to fully dry before exposure to water.
• Do not use over epoxy grout.
• As the manufacturer cannot know all the uses its products may be put to, it is the user's responsibility to determine suitability for use. If in doubt, contact Technical Services department for advice or refer to Technical Data Sheet. In all circumstances, the manufacturer’s liability is limited to the value of the manufacturer’s product purchased