DESCRIPTION

Everbuild Gun Grade Expanding Foam is a quick setting polyurethane based foam which expands greatly on application and yields up to 50 times original can contents. Can be cut, sawn, plastered and sealed over after approximately one hour. Fills irregular gaps, fixes framework, insulates and sound deadens. Designed for professional use in conjunction with Gun Foam Applicators.

FEATURES AND BENEFITS

• Free from fungicide and solvent - will not harm fish.
• Fast cure - gives quick early strengths.
• Extremely low dirt pick up.
• Waterproof seal - will withstand continuous water immersion.

USES

• Filling 
• Gaps around pipe entries through walls. 
• Gaps around window frames, door frames. 
• Electrical wire chasing prior to plastering 
• Deep joints prior to applying sealant or plaster 
• Irregular gaps in stone, brick, concrete or plaster
• Fixing 
• Door frames 
• Timber structures 
• Window sills and thresholds. 
• Window frames
• Insulating
• Behind cladding to exterior walls. 
• Behind soffit and barge boards

APPLICATION INFORMATION

• Ambient Air Temperature - 5°C to 25°C. (Optimum 20°C)
• Cutting Time - 20 mins to 1 hour depending on bead dimensions.
• Tack Free Time - Approx. 8 minutes

SUBSTRATE PREPARATION

Ensure all surfaces are clean, sound and free from dust and loose particles. Moisten surfaces to be sealed with water. This assists the curing process.

LIMITATIONS

• Carefully read instructions and text in warning box before use. 
• Do not over-pressurize container. 
• Always apply above 5°C.
• Clean spills immediately
• When using Everbuild Gun Grade Expanding Foam, always clean the gun thoroughly until the jet is clear of foam.