DESCRIPTION

Feb Febtank Plug, when mixed with clean water, provides a ready-to-use ultra-rapid setting durable plugging compound for active water leaks in concrete and masonry. The material expands as it cures to form a watertight seal with similar characteristics to concrete. Use on holes, joints and cracks. Sets both above and below the water level.

FEATURES AND BENEFITS

• Ultra-rapid set, instant plugging of leaks.
• Requires the addition of water only.
• Expands as it sets, ensuring a permanent watertight seal.
• Similar characteristics to, and compatible with, concrete.
• Chloride-free.
• Does not promote corrosion of the reinforcement.

USES

• Feb® Febtank Plug is used to stop active water or seepage under pressure through joints, cracks and holes in concrete or masonry, where a normal mortar would be washed away and resin mortars would not bond.
• Areas of use include:
• As a seal for construction joints or floor joints prior to basement tanking with Febtank Super.
• For instant sewer connections.
• For sealing cracks and construction joints in reservoirs and other water retaining structures.
• For rapid anchoring of bolts, conduits, pipes, railings, sanitary equipment, etc.
• Joint filling, pointing between concrete segments in concrete and brick tunnels, sewage systems, pipes and mines.

APPLICATION INFORMATION

• Consumption  - 1kg of powder will fill approximately 585cm³ or a joint 20mm x 20mm x 1.45m.

LIMITATIONS

• Always mix with clean fresh water.
• Setting times/strengths are indicative and set may be accelerated at higher temperatures or retarded at lower temperatures.
• Never exceed the quantity of water stated. This will dramatically reduce strength and may cause failure.
• Do not use on painted surfaces. Remove paint first.
• Do not use this product below 5°C.
• When used externally, do not apply when rain is imminent and protect from rain for at least 4 hours.
• As the manufacturer cannot know all the uses their products may be put to, it is the user’s responsibility to determain sutability for use. If in doubt, contact Technical Services Department.