DESCRIPTION

Leyland’s Hardwearing Matt is a superior quality paint specially formulated to deliver an extremely durable and hardwearing finish. The paint film is washable and scrubbable with both stain and moisture resisting properties making it ideal for areas that are subject to wear and tear or condensation. Suitable for interior walls and woodwork, the non yellowing formula is low odour and fast drying ensuring easy application and minimal downtime

FEATURES AND BENEFITS 

• Re-coat in 4 hours
• Can be applied by brush, roller or spray
• Easy to clean
• Formulated to be moisture resistant
• Water based paint
• Coverage: 12m2 per litre 

PREPARATION 

Ensure surface to be painted is sound, clean, dry and free from grease. Remove all loose and defective paint. Seal absorbent surfaces with a solution of up to 1 part water to 4 parts Hardwearing Matt. Prime bare timber and metal surfaces with the appropriate Primer. Rub down sound previously gloss painted surfaces with fine waterproof abrasive paper and rinse thoroughly before applying a pre-coat of Acrylic Primer Undercoat. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. For further advice contact Technical Advisory. 

APPLICATION 

Stir well before use. Do not thin, except for absorbent surfaces, or when applying by roller or spray when a small quantity of clean water may be added. Suitable for application by brush, roller or spray. Apply paint evenly by brush or roller and avoid overspreading. If required, apply a second coat after 4 hours. Do not apply in temperatures below 10˚C

CLEANING

Remove as much product as possible from application equipment before cleaning. Clean equipment immediately after use in warm, soapy water and rinse thoroughly. Some local authorities have special facilities for disposal of waste coatings. Do not empty product into drains or watercourses. Replace lid firmly