DESCRIPTION

Leyland’s Vinyl Matt is a smooth finishing matt emulsion providing a top quality and wipeable finish for both interior walls and ceilings.

Its high opacity nature helps you cover quicker and provides brilliant hiding power when it comes to imperfections.

FEATURES AND BENEFITS 

• Re-coat in 2-4 hours
• Touch dry in 1-2 hours
• Can be applied by brush, roller or spray
• Easy to clean
• Helps hide imperfections
• Water based paint
• Coverage: 14m2 per litre 

PREPARATION 

Ensure surface to be painted is sound, clean, dry and free from grease. Remove all loose and defective paint. Prime where required with the appropriate Primer. Rub down glossy surfaces with fine waterproof abrasive paper. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Seal absorbent surfaces with a solution of up to 1 part water to 9 parts Vinyl Matt.

APPLICATION 

Stir well before use. Do not thin, except for absorbent surfaces, or when applying by roller or spray when a small quantity of clean water may be added. Suitable for application by brush, roller or spray. Apply paint evenly by brush or roller and avoid overspreading. If required, apply a second coat after 2-4 hours. Do not apply in temperatures below 10˚C

CLEANING

Remove as much product as possible from application equipment before cleaning. Clean equipment immediately after use in warm, soapy water and rinse thoroughly. Some local authorities have special facilities for disposal of waste coatings. Do not empty product into drains or watercourses. Replace lid firmly