Parex Monogris E is a high performance polymer modified, weather resistant, grey base coat and finishing  render for vertical external and internal walls. Suitable for equalising suction on mixed substrates and as a bonding base coat on to high or low suction substrates.

Can be used as a grey coat finishing render or as a base coat for receiving a Parex decorative finish. e.g. Monorex, Monoblanco, Revlane, Crylane. If a Silicone or Acrylic topcoat render is to be applied, then Parex Maite is a suitable basecoat for this application onto either insulation or masonry substrates.

When mixing this product it is recommended to add 45.4-6.3 Litres of water per 25kg bag.

Coverage
Upto 1.3m2 per bag when being used at 15mm thickness
Upto 6.7m2 per bag when being used at 3mm thickness
Please note coverage will vary depending on substrate and application type

FEATURES AND BENEFITS

• Suitable for diesel & electric spray machines
• Excellent adhesion properties
• Semi-lightweight render suitable for multiple substrates

SUITABLE SUBSTRATES

• Ultra lightweight, lightweight & dense aggregate concrete blocks
• Bricks
• Aircrete and Breeze blocks
• Clay blocks
• Stone/rubble stone
• Shuttered concrete
• Expanded clay insulation blocks
• Clean, sound, well adhered existing render

Please note when applying this product onto some of the above substrates, Mico-Gobetis 3000 suction control primer will be required. Please click here to view this product.