DESCRIPTION

Rustins Quick Drying Black Matt Paint is a smooth matt finish that is ideal for use on wood and metal. For interior and exterior use.

PREPARATION

The surface must be clean and free from wax and grease. If already painted, remove flaking paint by scraping or with Rustins Strypit Paint and Varnish Stripper. If applying to metal, remove any rust with a scraper or with Rustins Rust Remover and apply one coat of Rustins Red Oxide Metal Primer. It is not necessary to apply Knotting to knots on bare wood, but if the wood is very absorbent, a coat of Rustins Primer and Undercoat may be applied before applying the Matt Black Paint.

APPLICATION

Apply liberally and evenly with a synthetic fibre brush. Do not apply at temperatures below 10°C or in conditions of high humidity.

RE-COATING TIME

The paint will be touch dry in approximately 30 minutes depending upon the temperature and humidity and can be re-coated after a minimum of two hours.

CLEANING

Remove as much paint as possible and return to this container. Brushes should then be cleaned immediately with water. If the brushes become hard, they may be cleaned with Rustins Brush Restorer or Rustins Cellulose Thinners.