DESCRIPTION

Rustins Quick Dry Brick and Tile Matt Red Paint is a quick drying high performance interior and exterior paint for a range of masonry applications such as walls, cement, stone, tiles and bricks.

PREPARATION

The surface must be clean and free from dust and any loose paint, dirt, fungal growth or solid matter likely to interfere with the adhesion of the paint. If the surface has been previously painted then apply to a small area to ensure that it is compatible. Do not apply to damp areas. Sources of damp should be eliminated before applying the paint. Can be applied over new pointing and brickwork.

APPLICATION

• Stir well before use. Do not thin the product.
• Apply evenly by brush.
• Two coats should be applied allowing 4 hours between coats in warm dry conditions.
• Cold damp conditions will significantly extend the drying times. Do not use below 10°C, in damp conditions or if rain is imminent.

RE-COATING TIME

The paint will be touch dry in approximately 30 minutes depending on temperature and humidity and can be re-coated after 4 hours.

CLEANING

Remove as much paint as possible and return to this container. Brushes should then be cleaned immediately with water.