DESCRIPTION

A water based matt white stain blocker for interior and exterior use, with excellent adhesion to wood, plaster and previously painted surfaces.  It will seal all stains that may bleed through and discolour paint. As a primer, it provides excellent adhesion to ceramic tiles, glass, and melamine.

FEATURES AND BENEFITS

• Water based & quick drying
• Low odour
• White matt finish
• Excellent adhesion
• Wide range of surface applications
• For interior & exterior

PREPARATION

The surface must be clean and free from wax and grease. Clean with water and detergent, rinsing with clean water. Remove any loose paint by scraping or sanding.

APPLICATION

Stir well before use. Apply liberally and evenly with a brush or roller using a brush with synthetic fibres manufactured for use with water-based paints. Do not thin. Do not use at temperatures below 10°C or in conditions of high humidity.

RE-COATING TIME

Surface dry in approximately 30 minutes, depending on temperature and humidity. Some stains may require a second coat, which can be applied two hours after the first coat is dried.

COVERAGE

1 litre will cover approximately 12 sq.m in 1 coat depending on the absorbency of the surface.

CLEANING

With water whilst still wet. If dried-on, clean equipment & brushes with Rustin’s Brush Restorer.