Sika Grout 111GP (Construction Grout) 25kg

Sika Grout 111GP (Construction Grout) 25kg

Product Code: 109652

Instock: 18 Bags

This is our current stock level against this product which is ready to be collected or delivered. Please note this stock level can vary whilst browsing & placing an order online.

Availability: In stock

PRICE

Exc VAT

  • Buy 1 Bags for £18.25
Product Description

DESCRIPTION

SikaGrout 111 GP is a one part flowable shrinkage compensated general purpose cementitious grout. Meets the requirements of BS EN 1504-6. Anchoring of reinforcing bars.

FEATURES AND BENEFITS

  • Excellent flow properties
  • Pre batched for quality 
  • Just add water
  • High compressive strength gain
  • Easy to mix and apply
  • Contains no chloride admixtures
  • Shrinkage Compensated
  • Fire rating and protection properties comparable to concrete 
  • Can be pumped or poured 
  • Good mechanical properties

USES

  • General purpose grouting 
  • Under stanchion plates 
  • Filling cavities, voids, gaps and recesses
  • Concrete repairs 
  • Machine & base plates 
  • For exterior and interior use 
  • Steel reinforcement anchoring

APPLICATION INFORMATION

  • Substrate Temperature - +5°C min. / +30°C max
  • Ambient Air Temperature - +5°C min. / +30°C max

SUBSTRATE PREPARATION

Concrete, mortar, stone:
Surfaces must be sound, thoroughly clean, free from ice, oils, grease, standing water and any loose or friable particles and any other surface contaminants. 

Steel, iron:
Clean, free from oil or grease, rust and scale etc.

Shutter/Formwork:
Where formwork is to be used, all formwork should be of adequate strength, treated with release agent and sealed to prevent leakage. Sealing can be achieved by using Sikaflex -11FC+ sealant beneath or around formwork and between joints. Ensure formwork includes outlets for extraction of the pre-soaking water. A header box/hopper should be constructed on one side of the formwork so that a grout head of 150-200 mm can be maintained during the grouting operation.

LIMITATIONS

  • Do not exceed water addition
  • Not to be used for concrete repair works
  • Do not use vibrating pokers
  • Use only on clean, sound substrate 
  • Avoid application in direct sun and/or strong wind. 
  • Pour or pump from one side only
  • Keep exposed surfaces to a minimum
  • Do not add additional water during the surface finishing as this will cause discoloration and cracking 
  • Protect freshly applied material from freezing and frost 
  • To avoid cracking in warm temperatures keep bags cool & use cold water

Product Downloads