DESCRIPTION

Sika Maxmix Colour is a concentrated one shot cement colorant that provides a permanent colour to all types of mortars, rendering, concrete and pointing. The liquid disperses evenly through the mix, to give a uniform shade for each mix batch. Shading can be adjusted to give a wide variety of colour depths. CE marked under EN12878.

FEATURES AND BENEFITS

• 250ml colours up to 100kg of mortar. 
• Easy to use gauged bottle. 
• Fast colour dispersion. 
• Less “messy” than powdered equivalents. 
• Quickly disperses in the mix.

USES

• Mortars, renders and screeds. 
• Pointing mortars 
• Colouring cement based tile grouts.

APPLICATION INFORMATION

• Usage - 25ml per 10kg of mortar
• Skin Time - 15 mins @ 23°C and 50%RH
• pH - 6 - 9

SUBSTRATE PREPARATION

All surfaces must be clean, dry and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. All glass must be cleaned prior to use.

LIMITATIONS

• Do not use in structural concrete.
• Do not use in lime based mixes. 
• Always use same batches of sand/cement.
• This will avoid any differences showing through over large areas. 
• It is the users responsibility to determine suitability for use. If in doubt contact Technical Services Department for further advice.