DESCRIPTION

Everbuild Multi-Stick based on hybrid polymer technology is the ultimate building adhesive, the first hybrid polymer grab adhesive especially created for the Trade, uniquely packed in a plastic 350ml cartridge. This superior adhesive has the ability to bond virtually anything to everything in both wet and dry conditions, and even underwater or in the rain. With incredible initial grab, high bonding strength, and almost limitless applications and other benefits, no tradesman should be without a tube of this next generation adhesive

FEATURES AND BENEFITS

• Primerless adhesion to all common building substrates, porous and non-porous. 
• Internal and External use. 
• Fast curing. 
• Solvent free. 
• Virtually odourless.
• Low dirt pick up. 
• Excellent break off and tooling. 
• Waterproof. 
• Weather resistant. 
• UV resistant. 
• Chemical resistant. 
• Service temperature resistance (-50°C to +100°C).
• Suitable for use with glass, lead, polycarbonate, and acrylic sheets.

USES

• As a high quality nail replacement adhesive, even to damp surfaces.
• Bonding mirrors to most common substrates. 
• Jointing cladding panels. 
• Bonding difficult materials such as specialised polymer systems, metals and fibreglass 
• Any application requiring high performance, durable bonding. 
• Applications where resistance to chemical spillage is required (garage forecourts etc.)

APPLICATION INFORMATION

• Curing Rate - 1-2mm per 24 hours

SUBSTRATE PREPARATION

The surfaces to be must be clean, dry and free from dust, grease and other contaminants. Improve adhesion by wiping surface with a suitable proprietary cleaner. Priming is generally not required, although we always advise testing small areas prior to use.

LIMITATIONS

• Use on overhead applications – Always use in conjunction with mechanical fixings.
• Use in conjunction with mechanical fixings for glass block fitting or large mirrors (>0.5m2 total area)
• For heavy items, provide temporary support until adhesive has dried.
• In areas of high UV; some darkening/discolouration may occur. This does not affect the performance. 
• Overpaintability: check compatibility with specific paint first before over painting large areas. 
• Do not use on polythene safety backed mirrors, polypropylene or Teflon. 
• Do not use on surfaces that bleed oils or plasticizers
• It is the user’s responsibility to determine suitability for use. If in doubt, please contact Technical Services Department for advice. 
• Not for use as part of a glazing system.
• Not for use in aquarium manufacture. 
• Not for use in conjunction with bitumen, or asphalt.
• Yellowing can occur in the dark.