DESCRIPTION

Lumberjack Woodworm Killer is a ready to use treatment for the eradication of all types and life stages of wood boring insects and their larvae, specifically woodworm. The added insecticide also aids to actively kill the woodworm and protect against re-infestation. Micro fine actives penetrate deep into the wood.

FEATURES AND BENEFITS

• Kills all types of wood boring insects
• Penetrates deep into the wood for long lasting protection 
• Overpaintable
• Ready to use, no need to dilute 
• Fast drying

USES

• Can be used on most internal furniture, woodwork and joinery such as doors, window frames, roof timbers, floorboards, joists, rafters, etc.
• It can be over painted, stained, varnished, or polished when dry if required
• For interior use only

APPLICATION INFORMATION

• Consumption -  Apply 2 coats at a rate of 1 litre of product per 3 - 4m² of surface. Dip end grains for a minimum of 3 minutes or flood thoroughly where dipping is not possible. Drying time is approximately 1 hour depending on temperature. 

SUBSTRATE PREPARATION

Ensure that timber to be treated is clean. Any paint or other surface coatings should be removed prior to application. Remove any badly infected or structurally unsound timber and replace with sound timber prior to application.

LIMITATIONS

• Ready to use - do not dilute. 
• Do not use in food preparation areas. 
• Do not use externally. It is the user’s responsibility to determine suitability for use. If in doubt, contact Technical Services Department for advice.