- Product Description
-
DESCRIPTION
An electric underfloor heating mat and cable system with pressure sensitive adhesive for the fastest installation. Features an ultra-thin 1.8mm wire that does not raise floor levels.
The StickyMat System is ideal for installations within regularly shaped areas, where the 0.5m wide mats can be quickly rolled out across the floor in parallel runs.
If you intend on using vinyl, carpet, timber, tiles or any other underfloor heating compatible floor finish, the system can (and should, in some cases like for carpet) be embedded within a self-levelling compound to provide a flat and level floor surface to lay over.
The StickyMat system can be used with all floor types compatible with underfloor heating whether you are choosing laminate flooring, vinyl, carpet, tiles or other. The compatibility with all floor coverings and the fact that StickyMat does not visibly raise your floor height makes it the ideal system for refurbishment projects – just remember to double check with your flooring supplier that the floor type you want to go for is compatible with the StickyMat System.
FEATURES AND BENEFITS
- The thinnest dual fluoropolymer coated heated wire – less than 1.8mm
- Sturdy glass fibre mesh with pressure sensitive adhesive for the fastest and most secure installation
- Quick installation time
- Lifetime warranty from Warmup
TECHNICAL SPECIFICATION
Operating voltage
230V: 50Hz
Width
500mm (0.5 metre)
Mat thickness
3mm
Inner / Outer Insulation
Advanced fluoropolymer (ETFE)
Output rating
200W/m²
Cold tail length
3m